2020-1 (34)

Design, manufacturing and commissioning of nuclear industry equipment

Article NameTechnology Optimization for Producing 110G13P Powder Steel by System Analysis Methods
AuthorsN.S. Zubenko1, E.A. Tsvelik2, R.V. Pirozhkov3
Address

Volgodonsk Engineering Technical Institute the branch of National Research Nuclear University “MEPhI”, Lenin St., 73/94, Volgodonsk, Rostov region, Russia 347360

1ORCID iD: 0000-0001-5682-519X

WoS Researcher ID: AAD-4371-2020

e-mail: paradizka007@yandex.ru

2ORCID iD: 0000-0001-9048-275X

WoS Researcher ID: G-3560-2018

e-mail: stvelik@mail.ru

3ORCID iD: 0000-0002-1547-6568

WoS Researcher ID: AAD-3193-2020

e-mail: roman-3.14@yandex.ru

AbstractThe paper deals with theoretical aspects of optimizing the structure and properties of 110G13P austenitic powder steel using the system analysis method (Pareto method). The optimal sintering temperature of cold-pressed work pieces is selected using the criterion of maximum wear resistance of steel. Microstructures of 110G13P steel in the selected range of sintering temperatures are given. The dependence of the obtained microstructures on the sintering temperature of samples is shown.
Keywordspowder metallurgy, dynamic high temperature pressing, sintering, system analysis, optimization, Pareto method, microstructure.
LanguageРусский
References
  1. Dorofeev Y.G., Zherdinski N.T., Kolesnikov V.A. Vliyanie sostava na strukturu i svojstva vy`sokomarganczovistoj metallokeramicheskoj stali G13M [Effect of Composition on the Structure and Properties of G13M High-Manganese Cermet Steel]. Novocherkasskij politexnicheskij institut [Technical Regulations of Novocherkassk Politech Institute]. Rostov-na-Donu. Rostovskoe knizhnoe izdatel`stvo [Rostov-on-Don. Rostov book publishing house], 1969. Т. 221. P. 146-151
    (in Russian).
  2. Dorofeev Y.G., Zherdinski N.T., Kolesnikov V.A. Poluchenie metallokeramicheskoj vysokomarganczovistoj stali G13M [Obtaining of G13M Cermet High Manganese Steel]. Novocherkasskij politexnicheskij institut [Technical Regulations Of Novocherkassk Politech Institute]. Rostov-na-Donu. Rostovskoe knizhnoe izdatel`stvo [Rostov-on-Don. Rostov Publishing House], 1969. Т. 221. P. 49-57 (in Russian).
  3. Vlasov V.I., Komolova E.F. Litaya vysokomarganczovistaya stal' [High-Manganese Cast Steel]. Moskava [Moscow], Mashgiz. 1963. 196 p. (in Russian).
  4. Saburov V.P. Sinergetika: novye tehnologii polucheniya i svojstva metallicheskih materialov [Sinergetics: New Technologies for Production and Properties of Metallic Materials]. Moskava [Moscow], IMETANUSSR, 1991. 51 p. (in Russian).
  5. Volynova T.F. Vysokomarganczovistye stali i splavy [High Manganese Steels and Alloys]. Moskava, Metallurgiya [Moscow, Metallurgy]. 1988. 343 p. (in Russian).
  6. Zherdinski N.T. Vliyanie tehnologicheskih faktorov na strukturu i svojstva stali G13p [Influence of Technological Factors on the Structure and Properties of G13P Steel]. Izvestiya Severo-Kavkazskogo nauchnogo czentra vysshey shkoly Tehnicheskoy nauki [Bulletin of the North Caucasian Scientific Center of the Higher School of Technical Science]. 1975. No 2. P. 71-74
    (in Russian).
  7. Dorofeev Y.G. Dinamicheskoe goryachee pressovanie v metallokeramike [Cermets]. Moskva, Metallurgiya [Мoscow, Metallurgy]. 1972. 176 p. (in Russian).
  8. Povyshenie kachestva otlivok iz stali G13L [Improving the Quality of Castings from G13L Steel]. Edited by. I.R. Kryanin. Moskva [Мoscow]. Gos. nauchn.-tehn. izd-vo mashinostroitel'noy lit [Government Science Technological Publisher of Mechanical Engineering Literature]. 1963. 204 p. (in Russian).
  9. Podinovsky V.V., NoginV.D. Pareto-optimal'nye resheniya mnogokriterial'nyh zadach [Pareto-Optimal Solutions to Multicriteria Tasks]. Moskva, Nauka [Moscow, Science]. 1982. 256 p.
    (in Russian).
  10. Blaug М. Ekonomicheskaya teoriya blagosostoyaniya Pareto [Pareto Economic Theory of Welfare]. Ekonomicheskaya mysl' v retrospektive [Economic Thought in Retrospect]. Moskva, Delo [Мoscow, Delo]. 1994. P. 540-561 (in Russian).
  11. Davydov N.G. Sitnov V.V. Svoystva, proizvodstvo i primenenie vysokomarganczovistoj stali [Properties, Production and Using of High Manganese Steel]. Moskva, Mashinostroenie [Moscow, Mashinostrojenije]. 1996. 232 p. (in Russian).
  12. Voronova N.A., Lev I.E., Mashinson I.Z. and other. Vliyanie vyderzhki pri zakalochnoj temperature na mehanicheskie svojstva stali G13L [Effect of Delay at Quenching Temperature on the Mechanical Properties of G13L Steel]. Metallovedenie i termicheskaya obrabotka metallov [Metal Science and Heat Treatment Of Metals]. 1967. No 4. P. 25-27 (in Russian).
  13. Dorofeev Y.G., Zherdinski N.T., Kolesnikov V.A. Vysokomarganczovistaja metallokeramicheskaja stal' [High Manganese Cermet Steel]. Poroshkovaya metallurgiya [Powder Metallurgy]. 1970. No 11. P. 28-31 (in Russian).
  14. Prasuk P.F. Termicheskaya obrabotka lityh detalej iz stali [Heat Treatment of Cast Parts from G13L Steel]. Metallovedenie i termicheskaya obrabotka metallov [Metal Science and Heat Treatment of Metals]. 1968. No 9. P. 63-66 (in Russian).
Papers48 - 55
URL ArticleURL Article
 Open Article